fix(install): bring install.sh up to Node 22 and document both Linux scripts (#165)

install.sh still installed Node 20 (dropped in #152), ran the Debian-only
NodeSource script on yum systems, and hard-coded /usr/bin/node. The
README only mentioned install.sh, not setup.sh.

install.sh now:
- installs Node 22 LTS from the right NodeSource repo per distro and
  checks the same 22.12+/24+ floor as setup.sh
- delegates npm install, mirror detection, native-binary checks and the
  build to setup.sh, so the two scripts share one install path
- stops the service and replaces dist/node_modules on re-install (data/
  is kept), copies bin/ (yt-dlp), and uses the real node path in the unit

README explains the difference between the two scripts and when to use
which. setup.sh's "Node.js not found" message no longer says 20+.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

README.md

@@ -65,22 +65,22 @@
 先装好 Node.js，其余依赖（含内置 FFmpeg）全部自动安装。
 
 ```
-1. 安装 Node.js 20 LTS 或 22 LTS（https://nodejs.org/ 或 https://nodejs.cn/）
+1. 安装 Node.js 22 LTS（https://nodejs.org/ 或 https://nodejs.cn/）
 2. 下载或 clone 本项目
 3. 双击 scripts\setup.bat      （安装依赖并构建，不含 Node.js 本身）
 4. 双击 scripts\start.bat      （启动机器人）
 5. 浏览器打开 http://localhost:3000
 ```
 
-> **先装 Node.js 20 LTS 或 22 LTS**（[nodejs.org](https://nodejs.org/) / 国内镜像 [nodejs.cn](https://nodejs.cn/)）。`setup.bat` 检测到没装 Node 时会给出下载地址并退出，不会替你安装。
+> **先装 Node.js 22 LTS**（[nodejs.org](https://nodejs.org/) / 国内镜像 [nodejs.cn](https://nodejs.cn/)）。`setup.bat` 检测到没装 Node 时会给出下载地址并退出，不会替你安装。
 >
 > 之后 `setup.bat` 会运行 `npm install` 安装所有依赖（包括内置 FFmpeg），按当前 Node 版本准备好原生模块，最后构建项目。之后每次只需双击 `start.bat` 启动。
 >
-> 更新的 Node 大版本（如 24）也能用，但通常没有现成的 opus / better-sqlite3 预编译包，安装脚本会改用源码编译，需要 C/C++ 构建工具且耗时更久——所以推荐 20 / 22 LTS。**装好之后不要再换 Node 大版本**：原生模块只能在编译它的那个版本上加载，换版本后必须重新运行 `setup.bat`（脚本会自动检测并重装，见下方常见问题）。
+> **Node 20 已不再支持**：better-sqlite3 从 12.10.0 起不再发布它那个 ABI（115）的预编译包，装起来必须先备好 Python + C++ 构建工具（[#152](https://github.com/ZHANGTIANYAO1/teamspeak-music-bot/issues/152)）。Node 24 及更新的大版本能用，但 @discordjs/opus 0.10.0 同样没有 Node 24（ABI 137）的预编译包，安装脚本会改用源码编译，需要构建工具且耗时更久——所以推荐 22 LTS。**装好之后不要再换 Node 大版本**：原生模块只能在编译它的那个版本上加载，换版本后必须重新运行 `setup.bat`（脚本会自动检测并重装，见下方常见问题）。
 
 ### 方式二：手动安装（所有系统）
 
-**前置条件：** [Node.js 20 LTS 或 22 LTS](https://nodejs.org/)（推荐；更新的大版本可用但需要源码编译原生模块）和一个 TeamSpeak 服务器（TS3/TS5/TS6 均可）。
+**前置条件：** [Node.js 22 LTS](https://nodejs.org/)（Node 24 及更新版本也能用，但需要源码编译原生模块；Node 20 已不再支持）和一个 TeamSpeak 服务器（TS3/TS5/TS6 均可）。
 FFmpeg **已自动内置**，无需手动安装。
 
 ```bash
@@ -136,14 +136,35 @@ ports:
 
 </details>
 
-### 方式四：Linux 一键安装
+### 方式四：Linux 安装脚本
+
+Linux 下有两个脚本，按需二选一：
+
+| | `scripts/install.sh`（一键安装 + 系统服务） | `scripts/setup.sh`（只安装构建） |
+|---|---|---|
+| 适合 | 想开箱即用、开机自启的服务器 | 想自己决定怎么常驻（screen / tmux / pm2 / 自写服务）的用户，或 macOS |
+| Node.js | 没有或版本过低时**自动安装 Node 22 LTS**（apt / yum / pacman） | **不会安装**，需先自行装好 Node 22.12+ |
+| 系统依赖 | 自动安装构建工具（和 FFmpeg，作为内置 FFmpeg 的后备） | 不安装，只提示 |
+| 安装位置 | 构建后复制到 `/opt/tsmusicbot`（重装时保留 `data/`） | 就在当前项目目录 |
+| 系统服务 | 自动配置 systemd 服务 `tsmusicbot` 并开机自启 | **不配置服务**，完成后自己 `npm start` |
+| 需要 root | 是（`sudo`） | 否 |
+
+两者共用同一套安装逻辑：`install.sh` 会调用 `setup.sh` 完成依赖安装、国内网络镜像切换、原生模块校验和构建，然后再复制文件、配置服务。
+
+**一键安装 + systemd 服务：**
 
 ```bash
 chmod +x scripts/install.sh
 sudo ./scripts/install.sh
+# 之后：systemctl status|restart|stop tsmusicbot，日志：journalctl -u tsmusicbot -f
 ```
 
-自动安装 Node.js 和依赖，配置 systemd 服务，支持开机自启。
+**只安装构建（不装 Node、不配服务）：**
+
+```bash
+bash scripts/setup.sh
+npm start
+```
 
 ## 更新升级
 
@@ -495,6 +516,7 @@ teamspeak-music-bot/
 ├── scripts/                    # 部署脚本
 │   ├── setup.bat               # Windows 首次安装
 │   ├── start.bat               # Windows 启动脚本
+│   ├── setup.sh                # Linux/macOS 首次安装（只安装构建）
 │   ├── install.sh              # Linux 一键安装 + systemd 服务
 │   └── docker/                 # Docker 部署文件
 │       ├── Dockerfile
@@ -510,7 +532,7 @@ teamspeak-music-bot/
 
 | 层级 | 技术 |
 |------|------|
-| **运行时** | Node.js 20 / 22 LTS, TypeScript 5 |
+| **运行时** | Node.js 22 LTS（推荐）, TypeScript 5 |
 | **后端框架** | Express 4, WebSocket (ws) |
 | **数据库** | better-sqlite3 (SQLite) |
 | **音频处理** | FFmpeg (ffmpeg-static 内置), @discordjs/opus |

package.json

@@ -4,7 +4,7 @@
   "description": "TeamSpeak music bot with NetEase Cloud Music and QQ Music support",
   "type": "module",
   "engines": {
-    "node": "^20.19.0 || ^22.12.0 || >=24.0.0"
+    "node": "^22.12.0 || >=24.0.0"
   },
   "scripts": {
     "dev": "tsx watch src/index.ts",

scripts/check-native.mjs

@@ -23,6 +23,7 @@ import { execFileSync } from "node:child_process";
 import { existsSync, readFileSync } from "node:fs";
 import { dirname, join } from "node:path";
 import { fileURLToPath } from "node:url";
+import { createLineWriter } from "./lib/console-log.mjs";
 
 const ROOT = join(dirname(fileURLToPath(import.meta.url)), "..");
 const NODE_MODULES = join(ROOT, "node_modules");
@@ -106,7 +107,11 @@ for (const spec of REQUIRED) {
 function report() {
   const stamp = readStamp();
   const mismatch = broken.find((b) => b.abiMismatch);
-  const out = (line) => process.stderr.write(`${line}\n`);
+  // Never let a failed console write become an uncaught error and replace this
+  // report with a stack trace - the console that cannot print the Chinese half
+  // of these lines is exactly the one a user needs the English half from.
+  // See scripts/lib/console-log.mjs and issue #152.
+  const out = createLineWriter(process.stderr);
 
   out("");
   out("============================================================");

scripts/docker/Dockerfile

@@ -4,7 +4,7 @@
 # ==========================================
 
 # --- Stage 1: Build backend + frontend ---
-FROM node:20-slim AS builder
+FROM node:22-slim AS builder
 
 # Install build tools for native modules (opus, better-sqlite3)
 RUN apt-get update && apt-get install -y --no-install-recommends \
@@ -30,7 +30,7 @@ RUN npm run build
 RUN rm -rf node_modules && npm ci --production && npm cache clean --force
 
 # --- Stage 2: Production image ---
-FROM node:20-slim
+FROM node:22-slim
 
 # Install system FFmpeg — the ffmpeg-static npm package bundles a pre-compiled
 # binary that can SIGSEGV inside Docker (incompatible glibc / missing libs).
@@ -51,6 +51,8 @@ COPY --from=builder /app/node_modules ./node_modules
 # goes through npm, but an interactive `docker exec ... npm start` would
 # otherwise die on a missing script rather than starting the bot.
 COPY --from=builder /app/scripts/check-native.mjs ./scripts/check-native.mjs
+# ...and the module it imports for crash-proof logging.
+COPY --from=builder /app/scripts/lib/console-log.mjs ./scripts/lib/console-log.mjs
 
 # Data directory for database, cookies, logs
 RUN mkdir -p /app/data

scripts/download-binaries.mjs

@@ -51,6 +51,7 @@ import { Readable } from "node:stream";
 import { execFileSync, execSync } from "node:child_process";
 import { createRequire } from "node:module";
 import { fileURLToPath } from "node:url";
+import { createLineWriter } from "./lib/console-log.mjs";
 
 const ROOT = join(dirname(fileURLToPath(import.meta.url)), "..");
 const NODE_MODULES = join(ROOT, "node_modules");
@@ -61,6 +62,11 @@ const CDN = process.argv[2] || "https://cdn.npmmirror.com/binaries";
 const PLATFORM = process.platform;
 const ARCH = process.arch;
 const NODE_ABI = process.versions.modules;
+const NODE_MAJOR = Number(process.versions.node.split(".")[0]);
+/** The newest Node major this project is regularly tested against, and the one
+ *  every required addon currently ships a prebuild for. Keep in sync with
+ *  TESTED_NODE_MAJOR in scripts/setup.bat. */
+const TESTED_NODE_MAJOR = 22;
 
 /** Modules the bot cannot start without. ffmpeg-static is optional: a system
  *  ffmpeg on PATH is a documented fallback, so it only ever produces a WARN. */
@@ -79,10 +85,17 @@ const FFMPEG_MIN_BYTES = 20 * 1024 * 1024;
 // log keeps the full transcript too.
 const ECHO_STDOUT = process.env.TSMB_BINARY_LOG_STDOUT === "1";
 
+// Both writers swallow a failed write instead of letting it become an uncaught
+// 'error' event: a console that cannot print the Chinese half of a line (issue
+// #152) must not be able to abort a whole setup run. The two streams degrade
+// independently, so setup.log keeps the full bilingual transcript either way.
+const writeErr = createLineWriter(process.stderr);
+const writeOut = createLineWriter(process.stdout);
+
 function log(msg) {
   const line = msg === "" ? "" : `  [binary] ${msg}`;
-  process.stderr.write(`${line}\n`);
-  if (ECHO_STDOUT) process.stdout.write(`${line}\n`);
+  writeErr(line);
+  if (ECHO_STDOUT) writeOut(line);
 }
 
 // ---------------------------------------------------------------------------
@@ -401,6 +414,25 @@ function buildFromSource(command) {
   execSync(command, { cwd: ROOT, stdio: ["ignore", "inherit", "inherit"] });
 }
 
+/**
+ * A 404 from the CDN is not a mirror outage: it means this exact package
+ * version publishes no prebuilt binary for the running Node ABI at all.
+ * @discordjs/opus 0.10.0 has no build for Node 24 (ABI 137), so a user on that
+ * major lands in the source-build fallback below and is told to install Python
+ * and a C++ toolchain. Switching Node major is the far cheaper fix, and nothing
+ * else in this output points at it. (better-sqlite3 dropping its Node 20 / ABI
+ * 115 builds in 12.10.0 is why Node 20 is no longer accepted at all.)
+ * See issue #152.
+ */
+function explainMissingPrebuild(name, version, err) {
+  if (!/HTTP 404/.test(err.message)) return;
+  log(`${name}: ${name}@${version} ships no prebuilt binary for Node ${NODE_MAJOR} (ABI ${NODE_ABI})`);
+  log(
+    `${name}: Node ${TESTED_NODE_MAJOR} LTS has one — switching Node is usually much quicker than ` +
+      `setting up a compiler (换用 Node ${TESTED_NODE_MAJOR} LTS 通常比装编译环境快得多)`,
+  );
+}
+
 function buildToolsHint() {
   log("Install build tools first:");
   log("  Windows: npm install --global windows-build-tools  (或安装 Visual Studio Build Tools + Python)");
@@ -521,6 +553,7 @@ async function ensureOpus() {
       log(`${name}: prebuilt binary installed`);
     } catch (cdnErr) {
       log(`${name}: CDN install failed (${cdnErr.message})`);
+      explainMissingPrebuild(name, version, cdnErr);
       log(`${name}: falling back to a source build — 'npm rebuild ${name}' (可能需要几分钟)`);
       buildFromSource(`npm rebuild ${name}`);
     }
@@ -591,6 +624,7 @@ async function ensureBetterSqlite3() {
       log(`${name}: prebuilt binary installed (${humanSize(dest)})`);
     } catch (cdnErr) {
       log(`${name}: CDN install failed (${cdnErr.message})`);
+      explainMissingPrebuild(name, version, cdnErr);
       log(`${name}: falling back to a source build — 'npm rebuild ${name} --build-from-source' (可能需要几分钟)`);
       buildFromSource(`npm rebuild ${name} --build-from-source`);
     }
@@ -661,10 +695,9 @@ try {
   // that same loop. Run these concurrently and the first module to fall back to
   // a source build kills every download still in flight — the connection is
   // healthy, the timer just never got a chance to be reset. That is not a rare
-  // race: npmmirror has no opus prebuild for ABI 137 (Node 24) and no
-  // better-sqlite3 prebuild for ABI 115 (Node 20), so on both of the Node
-  // versions this project supports, one module 404s within ~100ms and starts
-  // building while ffmpeg's ~80MB download is still going. ffmpeg is optional,
+  // race: @discordjs/opus 0.10.0 has no prebuild for ABI 137, so on Node 24 that
+  // module 404s within ~100ms and starts building while ffmpeg's ~80MB download
+  // is still going. ffmpeg is optional,
   // so the spurious failure used to be swallowed as a WARN and setup still
   // reported success — leaving the user with no ffmpeg and no working playback.
   // Nothing here benefits from overlap anyway: every probe is execFileSync.

scripts/install.sh

@@ -1,6 +1,16 @@
 #!/usr/bin/env bash
 set -euo pipefail
 
+#
+# TSMusicBot Installer (Linux, systemd)
+# - Installs system packages and Node.js 22 LTS
+# - Runs scripts/setup.sh to install dependencies, verify native binaries and build
+# - Copies the build to /opt/tsmusicbot and registers a systemd service (auto-start on boot)
+#
+# Only want to build and run it yourself (no Node install, no service)?
+# Use scripts/setup.sh instead — see README「Linux 安装脚本」.
+#
+
 echo "╔══════════════════════════════════════╗"
 echo "║       TSMusicBot Installer           ║"
 echo "╚══════════════════════════════════════╝"
@@ -11,6 +21,9 @@ SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
 INSTALL_DIR="/opt/tsmusicbot"
 SERVICE_NAME="tsmusicbot"
+# Node LTS line to install when a supported Node is missing. Keep in sync with
+# package.json "engines" and the floor check in setup.sh (#152).
+NODE_LTS_MAJOR=22
 
 # Verify we're in a valid project directory
 if [ ! -f "$PROJECT_DIR/package.json" ]; then
@@ -28,42 +41,66 @@ else
     exit 1
 fi
 
-echo "[1/6] Installing system dependencies..."
+# Supported: 22.12+ or 24+ (odd majors are excluded by better-sqlite3 and vitest).
+node_supported() {
+    command -v node &> /dev/null &&
+        node -e 'const v=process.versions.node.split(".").map(Number); process.exit((v[0]===22&&v[1]>=12)||v[0]>=24?0:1)'
+}
+
+echo "[1/5] Installing system dependencies..."
 case $OS in
     ubuntu|debian)
         sudo apt-get update -qq
-        sudo apt-get install -y -qq curl build-essential python3
+        sudo apt-get install -y -qq curl ca-certificates build-essential python3 ffmpeg
         ;;
-    centos|rhel|fedora)
+    centos|rhel|fedora|rocky|almalinux)
         sudo yum install -y curl gcc gcc-c++ make python3
         ;;
     arch|manjaro)
-        sudo pacman -S --noconfirm curl base-devel python
+        sudo pacman -S --noconfirm --needed curl base-devel python ffmpeg
         ;;
     *)
-        echo "Unsupported OS: $OS. Please install Node.js 20, build tools, and FFmpeg manually."
+        echo "Unsupported OS: $OS. Please install Node.js ${NODE_LTS_MAJOR}.12+ and build tools manually."
         ;;
 esac
 
-echo "[2/6] Installing Node.js 20 LTS..."
-if ! command -v node &> /dev/null || [[ $(node -v | cut -d. -f1 | tr -d 'v') -lt 20 ]]; then
-    curl -fsSL https://deb.nodesource.com/setup_20.x | sudo -E bash -
-    sudo apt-get install -y -qq nodejs 2>/dev/null || sudo yum install -y nodejs 2>/dev/null
+echo "[2/5] Installing Node.js ${NODE_LTS_MAJOR} LTS..."
+if node_supported; then
+    echo "Node.js $(node -v) already installed"
+else
+    case $OS in
+        ubuntu|debian)
+            curl -fsSL "https://deb.nodesource.com/setup_${NODE_LTS_MAJOR}.x" | sudo -E bash -
+            sudo apt-get install -y -qq nodejs
+            ;;
+        centos|rhel|fedora|rocky|almalinux)
+            curl -fsSL "https://rpm.nodesource.com/setup_${NODE_LTS_MAJOR}.x" | sudo bash -
+            sudo yum install -y nodejs
+            ;;
+        arch|manjaro)
+            sudo pacman -S --noconfirm --needed nodejs npm
+            ;;
+    esac
+    if ! node_supported; then
+        echo "Error: Node.js 22.12+ (or 24+) is required, found: $(node -v 2>/dev/null || echo none)."
+        echo "Install it from https://nodejs.org/ (or https://nodejs.cn/) and re-run this script."
+        exit 1
     fi
     echo "Node.js $(node -v) installed"
-
-echo "[3/6] Installing dependencies..."
-cd "$PROJECT_DIR"
-npm install
-if [ -d "$PROJECT_DIR/web/package.json" ] || [ -f "$PROJECT_DIR/web/package.json" ]; then
-    (cd "$PROJECT_DIR/web" && npm install)
 fi
 
-echo "[4/6] Building project..."
-npm run build
+echo "[3/5] Installing dependencies and building (scripts/setup.sh)..."
+bash "$SCRIPT_DIR/setup.sh"
 
-echo "[5/6] Copying to $INSTALL_DIR..."
+echo "[4/5] Copying to $INSTALL_DIR..."
+# Stop a running copy before replacing its files (re-install / upgrade).
+if systemctl is-active --quiet "$SERVICE_NAME" 2>/dev/null; then
+    sudo systemctl stop "$SERVICE_NAME"
+fi
 sudo mkdir -p "$INSTALL_DIR"
+# Replace build output wholesale so files removed upstream don't linger.
+# data/ (config, database, cookies) is never touched.
+sudo rm -rf "$INSTALL_DIR/dist" "$INSTALL_DIR/node_modules" "$INSTALL_DIR/web/dist"
 sudo cp -r "$PROJECT_DIR/dist" "$INSTALL_DIR/"
 sudo cp -r "$PROJECT_DIR/node_modules" "$INSTALL_DIR/"
 sudo cp "$PROJECT_DIR/package.json" "$INSTALL_DIR/"
@@ -72,13 +109,18 @@ if [ -d "$PROJECT_DIR/web/dist" ]; then
     sudo mkdir -p "$INSTALL_DIR/web"
     sudo cp -r "$PROJECT_DIR/web/dist" "$INSTALL_DIR/web/"
 fi
+# yt-dlp is looked up in bin/ next to dist/ before falling back to PATH
+if [ -d "$PROJECT_DIR/bin" ]; then
+    sudo cp -r "$PROJECT_DIR/bin" "$INSTALL_DIR/"
+fi
 # Copy scripts for future use
 sudo mkdir -p "$INSTALL_DIR/scripts"
 sudo cp -r "$PROJECT_DIR/scripts/"* "$INSTALL_DIR/scripts/" 2>/dev/null || true
 # Create data directory
 sudo mkdir -p "$INSTALL_DIR/data"
 
-echo "[6/6] Creating systemd service..."
+echo "[5/5] Creating systemd service..."
+NODE_BIN="$(command -v node)"
 sudo tee /etc/systemd/system/${SERVICE_NAME}.service > /dev/null <<EOL
 [Unit]
 Description=TSMusicBot - TeamSpeak Music Bot
@@ -88,7 +130,7 @@ After=network.target
 Type=simple
 User=root
 WorkingDirectory=${INSTALL_DIR}
-ExecStart=/usr/bin/node ${INSTALL_DIR}/dist/index.js
+ExecStart=${NODE_BIN} ${INSTALL_DIR}/dist/index.js
 Restart=on-failure
 RestartSec=5
 Environment=NODE_ENV=production
@@ -99,7 +141,7 @@ EOL
 
 sudo systemctl daemon-reload
 sudo systemctl enable ${SERVICE_NAME}
-sudo systemctl start ${SERVICE_NAME}
+sudo systemctl restart ${SERVICE_NAME}
 
 echo ""
 echo "╔══════════════════════════════════════╗"

scripts/lib/console-log.mjs

@@ -0,0 +1,142 @@
+/**
+ * Crash-proof line logging for the setup scripts.
+ *
+ * WHY THIS EXISTS (issue #152)
+ * ----------------------------
+ * setup.bat runs `chcp 65001` and shows progress on stderr. Some Windows
+ * consoles - Windows Server 2012 R2 above all - cannot render non-ASCII text in
+ * that code page and the OS fails the write with EIO. `process.stderr` is an
+ * ordinary stream, so that EIO arrives as an 'error' event, and a stream with
+ * no 'error' listener rethrows it as an uncaught exception:
+ *
+ *     Error: write EIO
+ *         at afterWriteDispatched (node:internal/stream_base_commons:159:15)
+ *         ...
+ *         at log (scripts/download-binaries.mjs:84:18)
+ *         at ensureFfmpeg (scripts/download-binaries.mjs:451:5)
+ *
+ * That is setup killing itself inside its own progress logging, on the first
+ * line of the run that happened to contain Chinese - nothing was wrong with the
+ * download it was about to start.
+ *
+ * So: listen for the error and degrade instead of dying.
+ *   full  -> ascii : drop the CJK the console choked on, keep the English half
+ *   ascii -> off   : the stream is simply gone (closed pipe) - stay quiet
+ * Each stream degrades on its own, so a console that gives up does not cost
+ * setup.log its full bilingual transcript: that stdout is a redirected file.
+ */
+
+const HAS_NON_ASCII = /[^\x00-\x7F]/;
+
+/** Placeholders for a removed run: one that separated words, one that did not. */
+const SPACED = "\u0000";
+const TIGHT = "\u0001";
+
+/** Punctuation the bilingual strings use that has an obvious ASCII twin. */
+const PUNCTUATION = new Map(
+  Object.entries({
+    "—": "-",
+    "–": "-",
+    "…": "...",
+    "“": '"',
+    "”": '"',
+    "‘": "'",
+    "’": "'",
+    "，": ",",
+    "。": ".",
+    "、": ",",
+    "：": ":",
+    "；": ";",
+    "（": "(",
+    "）": ")",
+    "！": "!",
+    "？": "?",
+    "←": "<-",
+    "→": "->",
+    "×": "x",
+  }),
+);
+
+/**
+ * Best-effort ASCII rendering of a log line, for a console that cannot print
+ * anything else. Returns null when nothing worth printing survives - every
+ * Chinese-only line in these scripts sits directly beside an English line
+ * saying the same thing, so dropping it loses no information.
+ */
+export function toAsciiFallback(text) {
+  if (!HAS_NON_ASCII.test(text)) return text;
+
+  let out = "";
+  for (const ch of text) out += PUNCTUATION.get(ch) ?? ch;
+
+  out = out
+    .replace(/[\u0000\u0001]/g, "")
+    // Mark each removed run rather than just deleting it, so the tidy-up below
+    // can tell "a separator that introduced text we dropped" from "a separator
+    // that belongs to the English half". SPACED was holding two ASCII words
+    // apart; TIGHT was hugging a bracket or a comma.
+    .replace(/[ \t]*[^\x00-\x7F]+[ \t]*/g, (run) =>
+      /^[ \t]/.test(run) && /[ \t]$/.test(run) ? SPACED : TIGHT,
+    )
+    // "(可能需要几分钟)" — the parentheses held nothing else.
+    .replace(/[ \t]*\([ \t]*(?:[\u0000\u0001][ \t]*)+\)/g, "")
+    // "FAILED — 编译失败", "(~80 MB, 请耐心等待)" — drop the trailing marks along
+    // with the separators that were only ever there to introduce them.
+    .replace(/[ \t]*[-,;:]*[ \t]*(?:[\u0000\u0001][ \t,;:-]*)+(?=[)\]]|$)/gm, "")
+    .replace(/\u0000/g, " ")
+    .replace(/\u0001/g, "")
+    .replace(/[ \t]+$/gm, "");
+
+  return /[A-Za-z0-9]/.test(out) ? out : null;
+}
+
+/** One degradation state per stream, shared by every writer built on it. */
+const guards = new WeakMap();
+
+function guardFor(stream) {
+  const existing = guards.get(stream);
+  if (existing) return existing;
+
+  const guard = { mode: "full" };
+  guards.set(stream, guard);
+  try {
+    // The whole point: without this listener the next EIO/EPIPE is fatal.
+    stream.on("error", () => degrade(guard));
+  } catch {
+    /* not an EventEmitter - the try/catch around write() still guards us */
+  }
+  return guard;
+}
+
+function degrade(guard) {
+  guard.mode = guard.mode === "full" ? "ascii" : "off";
+}
+
+/**
+ * Build a `writeLine(text)` that appends a newline, never throws, and never
+ * lets a failed console write take the process down with it.
+ * Returns true when the line reached the stream.
+ */
+export function createLineWriter(stream) {
+  const guard = guardFor(stream);
+
+  return function writeLine(text) {
+    if (guard.mode === "off") return false;
+
+    let line = text;
+    if (guard.mode === "ascii") {
+      line = toAsciiFallback(text);
+      if (line === null) return false;
+    }
+
+    try {
+      stream.write(`${line}\n`);
+      return true;
+    } catch {
+      // A synchronous throw (EBADF on a closed handle) never reaches the
+      // 'error' listener, so degrade here too.
+      degrade(guard);
+      return false;
+    }
+  };
+}

scripts/lib/console-log.test.mjs

@@ -0,0 +1,133 @@
+import { EventEmitter } from "node:events";
+import { describe, expect, it, vi } from "vitest";
+
+import { createLineWriter, toAsciiFallback } from "./console-log.mjs";
+
+/** Stand-in for process.stderr: an EventEmitter with a write() we can steer. */
+function fakeStream() {
+  const stream = new EventEmitter();
+  stream.written = [];
+  stream.throwOnWrite = false;
+  stream.write = (chunk) => {
+    if (stream.throwOnWrite) throw new Error("EBADF");
+    stream.written.push(chunk);
+    return true;
+  };
+  return stream;
+}
+
+describe("toAsciiFallback", () => {
+  it("leaves ASCII lines exactly as they are", () => {
+    const line = "  [binary] better-sqlite3: OK (loads under v22.23.2, ABI 127)";
+    expect(toAsciiFallback(line)).toBe(line);
+    expect(toAsciiFallback("")).toBe("");
+  });
+
+  it("keeps the English half of the line that crashed setup in #152", () => {
+    expect(
+      toAsciiFallback(
+        "  [binary] ffmpeg-static: GET https://cdn/ffmpeg.gz  (~80 MB, 这一步比较慢,请耐心等待)",
+      ),
+    ).toBe("  [binary] ffmpeg-static: GET https://cdn/ffmpeg.gz  (~80 MB)");
+  });
+
+  it("drops parentheses and separators left stranded by the removed text", () => {
+    expect(
+      toAsciiFallback("  [binary] better-sqlite3: falling back — 'npm rebuild' (可能需要几分钟)"),
+    ).toBe("  [binary] better-sqlite3: falling back - 'npm rebuild'");
+    expect(
+      toAsciiFallback("  Windows: npm install --global windows-build-tools  (或安装 VS Build Tools)"),
+    ).toBe("  Windows: npm install --global windows-build-tools  (VS Build Tools)");
+  });
+
+  it("drops a Chinese-only line, which always has an English twin beside it", () => {
+    expect(toAsciiFallback("必需的原生模块不可用,机器人无法启动 —— 请查看上面的错误信息。")).toBeNull();
+  });
+
+  it("preserves the indentation the summary is aligned on, and drops the dangling dash", () => {
+    expect(toAsciiFallback("  - better-sqlite3     FAILED — 编译失败")).toBe(
+      "  - better-sqlite3     FAILED",
+    );
+  });
+
+  it("keeps a separator that belongs to the English half", () => {
+    expect(toAsciiFallback("Summary — Node v22.0.0 / ABI 127 / win32-x64:")).toBe(
+      "Summary - Node v22.0.0 / ABI 127 / win32-x64:",
+    );
+  });
+});
+
+describe("createLineWriter", () => {
+  it("appends a newline and reports the write", () => {
+    const stream = fakeStream();
+    expect(createLineWriter(stream)("hello")).toBe(true);
+    expect(stream.written).toEqual(["hello\n"]);
+  });
+
+  it("survives the EIO that killed setup: an 'error' event must not throw", () => {
+    const stream = fakeStream();
+    createLineWriter(stream);
+    expect(stream.listenerCount("error")).toBe(1);
+    expect(() => stream.emit("error", Object.assign(new Error("write EIO"), { code: "EIO" }))).not.toThrow();
+  });
+
+  it("falls back to ASCII once the console has refused a line", () => {
+    const stream = fakeStream();
+    const write = createLineWriter(stream);
+    write("  [binary] GET https://cdn/ffmpeg.gz  (~80 MB, 这一步比较慢,请耐心等待)");
+    stream.emit("error", new Error("write EIO"));
+    write("  [binary] GET https://cdn/opus.tar.gz  (~1 MB, 这一步比较慢,请耐心等待)");
+    expect(stream.written).toEqual([
+      "  [binary] GET https://cdn/ffmpeg.gz  (~80 MB, 这一步比较慢,请耐心等待)\n",
+      "  [binary] GET https://cdn/opus.tar.gz  (~1 MB)\n",
+    ]);
+  });
+
+  it("goes quiet after a second failure rather than retrying a dead stream", () => {
+    const stream = fakeStream();
+    const write = createLineWriter(stream);
+    stream.emit("error", new Error("write EIO"));
+    stream.emit("error", new Error("write EPIPE"));
+    expect(write("anything at all")).toBe(false);
+    expect(stream.written).toEqual([]);
+  });
+
+  it("degrades on a synchronous throw too, which never reaches the listener", () => {
+    const stream = fakeStream();
+    const write = createLineWriter(stream);
+    stream.throwOnWrite = true;
+    expect(write("  [binary] 下载中 downloading")).toBe(false);
+    stream.throwOnWrite = false;
+    write("  [binary] 下载中 downloading");
+    expect(stream.written).toEqual(["  [binary] downloading\n"]);
+  });
+
+  it("degrades each stream on its own, so setup.log keeps the full transcript", () => {
+    const console_ = fakeStream();
+    const logFile = fakeStream();
+    const writeConsole = createLineWriter(console_);
+    const writeLog = createLineWriter(logFile);
+    console_.emit("error", new Error("write EIO"));
+
+    const line = "  [binary] ffmpeg-static: 下载完成 done";
+    writeConsole(line);
+    writeLog(line);
+
+    expect(console_.written).toEqual(["  [binary] ffmpeg-static: done\n"]);
+    expect(logFile.written).toEqual([`${line}\n`]);
+  });
+
+  it("never installs a second listener for a stream that already has a writer", () => {
+    const stream = fakeStream();
+    createLineWriter(stream);
+    createLineWriter(stream);
+    expect(stream.listenerCount("error")).toBe(1);
+  });
+
+  it("still guards a stream that is not an EventEmitter", () => {
+    const stream = { write: vi.fn(() => { throw new Error("EBADF"); }) };
+    const write = createLineWriter(stream);
+    expect(() => write("line")).not.toThrow();
+    expect(write("line")).toBe(false);
+  });
+});

scripts/setup.bat

@@ -11,7 +11,7 @@ title TSMusicBot Setup
 :: ============================================================
 
 set "SCRIPT_VERSION=2.2"
-set "MIN_NODE_MAJOR=20"
+set "MIN_NODE_MAJOR=22"
 :: Newest Node major this project is regularly tested against. Anything above
 :: still works, it just may have no prebuilt addons and fall back to a source build.
 set "TESTED_NODE_MAJOR=22"
@@ -67,13 +67,15 @@ for /f "tokens=1 delims=v." %%a in ("%NODE_VER%") do set "NODE_MAJOR=%%a"
 call :log "Node.js version: %NODE_VER%"
 echo [OK] Node.js found: %NODE_VER%
 
-:: The supported floor is not just a major version, so let node decide:
-:: @honeybbq/teamspeak-client needs >=20.19, @sansenjian/qq-music-api needs
-:: >=20.17 / >=22.9, and the odd majors (21 / 23) are excluded by
-:: better-sqlite3 and vitest. Keep this in sync with "engines" in package.json.
-node -e "const v=process.versions.node.split('.').map(Number); process.exit((v[0]===20&&v[1]>=19)||(v[0]===22&&v[1]>=12)||v[0]>=24?0:1)"
+:: The supported floor is not just a major version, so let node decide.
+:: Node 20 was dropped: better-sqlite3 ships no prebuilt binary for its ABI
+:: (115) since 12.10.0, so every Node 20 install needed Python and a C++
+:: toolchain just to get off the ground (issue #152). The odd majors (21 /
+:: 23) are excluded by better-sqlite3 and vitest.
+:: Keep this in sync with "engines" in package.json.
+node -e "const v=process.versions.node.split('.').map(Number); process.exit((v[0]===22&&v[1]>=12)||v[0]>=24?0:1)"
 if errorlevel 1 (
-    call :error "Node.js %NODE_VER% is not supported. Use Node 20.19+ LTS or Node 22.12+ LTS."
+    call :error "Node.js %NODE_VER% is not supported. Use Node 22.12+ LTS or newer."
     echo         Download: https://nodejs.org/  or  https://nodejs.cn/
     pause
     exit /b 1
@@ -86,10 +88,10 @@ if errorlevel 1 (
 :: characters and starts eating the "echo " prefix of following lines.
 :: Bilingual guidance lives in the Node scripts, which print UTF-8 reliably.
 if %NODE_MAJOR% GTR %TESTED_NODE_MAJOR% (
-    echo [WARN] Node %NODE_VER% is newer than the tested LTS line, Node 20 / Node 22.
+    echo [WARN] Node %NODE_VER% is newer than the tested LTS line, Node 22.
     echo        Newer Node majors may have no prebuilt opus / better-sqlite3,
     echo        so setup falls back to a source build - slower, needs C++ build tools.
-    echo        Recommended: Node 20 LTS or Node 22 LTS - https://nodejs.org/ or https://nodejs.cn/
+    echo        Recommended: Node 22 LTS - https://nodejs.org/ or https://nodejs.cn/
     echo        This is only a warning; setup still builds the binaries for %NODE_VER%.
     call :log "[WARN] Node major %NODE_MAJOR% is newer than tested LTS %TESTED_NODE_MAJOR%"
 )

scripts/setup.sh

@@ -21,7 +21,7 @@ echo ""
 
 # ---- Check Node.js ----
 if ! command -v node &>/dev/null; then
-    echo "[ERROR] Node.js not found. Please install Node.js 20+ from https://nodejs.org"
+    echo "[ERROR] Node.js not found. Please install Node.js 22.12+ LTS from https://nodejs.org"
     echo "        or https://nodejs.cn/ (China mirror)."
     exit 1
 fi
@@ -32,16 +32,18 @@ echo "[OK] Node.js $(node -v)"
 TESTED_NODE_MAJOR=22
 NODE_MAJOR="$(node -p 'process.versions.node.split(".")[0]')"
 
-# The floor is not just a major version, so let node decide: @honeybbq/teamspeak-client
-# needs >=20.19, @sansenjian/qq-music-api needs >=20.17 / >=22.9, and the odd majors
-# (21 / 23) are excluded by better-sqlite3 and vitest. Keep in sync with package.json "engines".
-if ! node -e 'const v=process.versions.node.split(".").map(Number); process.exit((v[0]===20&&v[1]>=19)||(v[0]===22&&v[1]>=12)||v[0]>=24?0:1)'; then
-    echo "[ERROR] Node.js $(node -v) is not supported. Use Node 20.19+ LTS or Node 22.12+ LTS."
+# The floor is not just a major version, so let node decide. Node 20 was dropped:
+# better-sqlite3 ships no prebuilt binary for its ABI (115) since 12.10.0, so every
+# Node 20 install needed Python and a C++ toolchain just to get off the ground
+# (issue #152). The odd majors (21 / 23) are excluded by better-sqlite3 and vitest.
+# Keep in sync with package.json "engines".
+if ! node -e 'const v=process.versions.node.split(".").map(Number); process.exit((v[0]===22&&v[1]>=12)||v[0]>=24?0:1)'; then
+    echo "[ERROR] Node.js $(node -v) is not supported. Use Node 22.12+ LTS or newer."
     echo "        https://nodejs.org/  |  https://nodejs.cn/"
     exit 1
 fi
 if [ "$NODE_MAJOR" -gt "$TESTED_NODE_MAJOR" ]; then
-    echo "[WARN] Node $(node -v) is newer than the tested LTS line (Node 20 / Node 22)."
+    echo "[WARN] Node $(node -v) is newer than the tested LTS line (Node 22)."
     echo "       新版 Node 可能没有现成的 opus / better-sqlite3 预编译包,"
     echo "       安装时会自动改用源码编译,需要 C/C++ 构建工具,速度较慢。"
     echo "       This is only a warning - setup builds the binaries for $(node -v) either way."

src/bot/instance.test.ts

@@ -1538,3 +1538,55 @@ describe("BotInstance live-queue persistence (#119)", () => {
     }
   });
 });
+
+describe("BotInstance Bilibili multi-P resolution", () => {
+  it("resolves multi-P search result to P1 with accurate duration and name", async () => {
+    const multiPSongDetail = {
+      id: "BV1multiP?p=1",
+      name: "测试视频 - P1 分P1",
+      artist: "UP主",
+      album: "",
+      duration: 100, // P1 duration
+      coverUrl: "",
+      platform: "bilibili" as const,
+    };
+    const mockBili = {
+      platform: "bilibili" as const,
+      search: vi.fn().mockResolvedValue({
+        songs: [{
+          id: "BV1multiP",
+          name: "测试视频",
+          artist: "UP主",
+          album: "",
+          duration: 300, // total duration in search
+          coverUrl: "",
+          platform: "bilibili",
+        }],
+        albums: [],
+        playlists: [],
+      }),
+      getSongDetail: vi.fn().mockResolvedValue(multiPSongDetail),
+      getSongUrl: vi.fn().mockResolvedValue({ url: "http://audio.test" }),
+    };
+
+    const ctx = {
+      config: { commandPrefix: "!" },
+      lastSearchResults: [] as any[],
+      getProvider: () => mockBili,
+      getProviderFor: () => mockBili,
+    };
+
+    const res = await (BotInstance.prototype as any).resolvePlayQuery.call(ctx, {
+      name: "play",
+      args: "测试视频",
+      rawArgs: ["测试视频"],
+      flags: new Set(),
+    });
+
+    expect(res.song).toBeDefined();
+    expect(res.song.id).toBe("BV1multiP?p=1");
+    expect(res.song.name).toBe("测试视频 - P1 分P1");
+    expect(res.song.duration).toBe(100);
+  });
+});
+

src/bot/instance.ts

@@ -968,6 +968,14 @@ export class BotInstance extends EventEmitter {
     this.voteSkipUsers.clear();
     const provider = this.getProviderFor(song.platform);
     try {
+      if (song.platform === "bilibili" && (!song.id.includes("?p=") || song.duration === 0)) {
+        const detail = await provider.getSongDetail(song.id);
+        if (detail) {
+          song.duration = detail.duration;
+          song.name = detail.name;
+          song.id = detail.id;
+        }
+      }
       const result = await provider.getSongUrl(song.id);
       if (!result?.url) {
         this.logger.warn({ songId: song.id, name: song.name }, "No URL available, skipping");
@@ -1134,7 +1142,12 @@ export class BotInstance extends EventEmitter {
         return { error: `No recent search. Use ${p}search <name> first.` };
       if (sel > this.lastSearchResults.length)
         return { error: `Invalid selection #${sel}. ${p}search returned ${this.lastSearchResults.length} results.` };
-      return { song: this.lastSearchResults[sel - 1] };
+      let song = this.lastSearchResults[sel - 1];
+      if (song.platform === "bilibili") {
+        const detail = await this.getProviderFor("bilibili").getSongDetail(song.id);
+        if (detail) song = { ...detail, platform: "bilibili" };
+      }
+      return { song };
     }
 
     // 2) id/URL — fetch that exact song.
@@ -1151,7 +1164,12 @@ export class BotInstance extends EventEmitter {
     const provider = this.getProvider(cmd.flags);
     const result = await provider.search(args, 1);
     if (result.songs.length === 0) return { error: `No results found for: ${args}` };
-    return { song: { ...result.songs[0], platform: provider.platform } };
+    let song = result.songs[0];
+    if (provider.platform === "bilibili") {
+      const detail = await provider.getSongDetail(song.id);
+      if (detail) song = detail;
+    }
+    return { song: { ...song, platform: provider.platform } };
   }
 
   private async cmdSearch(cmd: ParsedCommand): Promise<string> {

src/music/bilibili.test.ts

@@ -37,3 +37,128 @@ describe("BiliBiliProvider.search pagination", () => {
     expect(searchParams(get).page).toBe("1");
   });
 });
+
+describe("BiliBiliProvider multi-P support", () => {
+  it("parseBilibiliId extracts bvid and page correctly", async () => {
+    const { parseBilibiliId } = await import("./bilibili.js");
+    expect(parseBilibiliId("BV1yxHQeYEuE")).toEqual({ bvid: "BV1yxHQeYEuE", page: 1 });
+    expect(parseBilibiliId("BV1yxHQeYEuE?p=3")).toEqual({ bvid: "BV1yxHQeYEuE", page: 3 });
+    expect(parseBilibiliId("BV1yxHQeYEuE:p2")).toEqual({ bvid: "BV1yxHQeYEuE", page: 2 });
+    expect(parseBilibiliId("https://www.bilibili.com/video/BV1yxHQeYEuE?p=5")).toEqual({
+      bvid: "BV1yxHQeYEuE",
+      page: 5,
+    });
+    expect(parseBilibiliId("some-other-id")).toEqual({ bvid: "some-other-id", page: 1 });
+  });
+
+  function mockViewProvider(viewData: any, playUrlData?: any) {
+    const p = new BiliBiliProvider();
+    const get = vi.fn().mockImplementation((url: string, opts?: any) => {
+      if (url === "/x/web-interface/view") {
+        return Promise.resolve({ data: { data: viewData } });
+      }
+      if (url === "/x/player/playurl") {
+        return Promise.resolve({ data: { data: playUrlData ?? {} } });
+      }
+      return Promise.resolve({ data: {} });
+    });
+    (p as any).buvidInitialized = true;
+    (p as any).api = { get };
+    return { p, get };
+  }
+
+  const multiPViewData = {
+    bvid: "BV1multiP",
+    title: "测试多P教程",
+    pic: "http://i0.hdslb.com/bfs/archive/test.jpg",
+    duration: 300, // 总时长 300 秒 (120 + 180)
+    owner: { name: "UP主测试" },
+    pages: [
+      { cid: 10001, page: 1, part: "第一讲 入门", duration: 120 },
+      { cid: 10002, page: 2, part: "第二讲 进阶", duration: 180 },
+    ],
+  };
+
+  const singlePViewData = {
+    bvid: "BV1singleP",
+    title: "测试单P视频",
+    pic: "http://i0.hdslb.com/bfs/archive/single.jpg",
+    duration: 200,
+    owner: { name: "UP主测试" },
+    pages: [
+      { cid: 20001, page: 1, part: "测试单P视频", duration: 200 },
+    ],
+  };
+
+  it("getSongDetail for single-P video returns total duration and clean bvid", async () => {
+    const { p } = mockViewProvider(singlePViewData);
+    const song = await p.getSongDetail("BV1singleP");
+    expect(song).not.toBeNull();
+    expect(song!.id).toBe("BV1singleP");
+    expect(song!.name).toBe("测试单P视频");
+    expect(song!.duration).toBe(200);
+    expect(song!.platform).toBe("bilibili");
+  });
+
+  it("getSongDetail for multi-P video without ?p defaults to P1 with P1 duration", async () => {
+    const { p } = mockViewProvider(multiPViewData);
+    const song = await p.getSongDetail("BV1multiP");
+    expect(song).not.toBeNull();
+    expect(song!.id).toBe("BV1multiP?p=1");
+    expect(song!.name).toBe("测试多P教程 - P1 第一讲 入门");
+    expect(song!.duration).toBe(120); // P1 独立时长，而非总时长 300！
+    expect(song!.platform).toBe("bilibili");
+  });
+
+  it("getSongDetail for multi-P video with ?p=2 returns P2 with P2 duration", async () => {
+    const { p } = mockViewProvider(multiPViewData);
+    const song = await p.getSongDetail("BV1multiP?p=2");
+    expect(song).not.toBeNull();
+    expect(song!.id).toBe("BV1multiP?p=2");
+    expect(song!.name).toBe("测试多P教程 - P2 第二讲 进阶");
+    expect(song!.duration).toBe(180); // P2 独立时长
+    expect(song!.platform).toBe("bilibili");
+  });
+
+  it("getVideoParts returns all parts with duration and cid", async () => {
+    const { p } = mockViewProvider(multiPViewData);
+    const partsResult = await p.getVideoParts("BV1multiP");
+    expect(partsResult).not.toBeNull();
+    expect(partsResult!.bvid).toBe("BV1multiP");
+    expect(partsResult!.title).toBe("测试多P教程");
+    expect(partsResult!.parts).toHaveLength(2);
+    expect(partsResult!.parts[0]).toEqual({
+      part: 1,
+      cid: 10001,
+      title: "第一讲 入门",
+      duration: 120,
+    });
+    expect(partsResult!.parts[1]).toEqual({
+      part: 2,
+      cid: 10002,
+      title: "第二讲 进阶",
+      duration: 180,
+    });
+  });
+
+  it("getSongUrl requests playurl with correct cid for specific part", async () => {
+    const playUrlResponse = {
+      dash: {
+        audio: [
+          { bandwidth: 64000, baseUrl: "http://audio.64k.test" },
+          { bandwidth: 320000, baseUrl: "http://audio.320k.test" },
+        ],
+      },
+    };
+    const { p, get } = mockViewProvider(multiPViewData, playUrlResponse);
+
+    const result = await p.getSongUrl("BV1multiP?p=2");
+    expect(result).not.toBeNull();
+    expect(result!.url).toBe("http://audio.320k.test");
+
+    const playurlCall = get.mock.calls.find((c: any[]) => c[0] === "/x/player/playurl");
+    expect(playurlCall).toBeTruthy();
+    expect(playurlCall![1].params.cid).toBe(10002); // 准确传入 P2 的 cid
+    expect(playurlCall![1].params.bvid).toBe("BV1multiP"); // 纯净 bvid
+  });
+});

src/music/bilibili.ts

@@ -27,6 +27,38 @@ const WBI_MIXIN_KEY_ENC_TAB = [
 
 const WBI_KEY_TTL_MS = 6 * 60 * 60 * 1000; // wbi keys rotate ~daily; refresh every 6h
 
+export interface BiliVideoPart {
+  part: number;
+  cid: number;
+  title: string;
+  duration: number;
+}
+
+export interface BiliVideoPartsResult {
+  bvid: string;
+  title: string;
+  coverUrl: string;
+  artist: string;
+  parts: BiliVideoPart[];
+}
+
+/**
+ * 解析带有分P信息的 B站 ID 或 URL。
+ * 支持形如 "BVxxxx", "BVxxxx?p=2", "BVxxxx:p2" 以及完整 URL 等格式，默认 page 为 1。
+ */
+export function parseBilibiliId(songId: string): { bvid: string; page: number } {
+  const str = (songId ?? "").trim();
+  const bvMatch = str.match(/BV[0-9A-Za-z]+/i);
+  if (!bvMatch) {
+    return { bvid: str, page: 1 };
+  }
+  const bvid = bvMatch[0];
+  const pageMatch = str.match(/[?&]p=(\d+)|:p?(\d+)/i);
+  const pageStr = pageMatch ? (pageMatch[1] ?? pageMatch[2]) : undefined;
+  const page = pageStr ? parseInt(pageStr, 10) : 1;
+  return { bvid, page: Math.max(1, page) };
+}
+
 export class BiliBiliProvider implements MusicProvider {
   readonly platform = "bilibili" as const;
   private api: AxiosInstance;
@@ -192,18 +224,41 @@ export class BiliBiliProvider implements MusicProvider {
   }
 
   async getSongDetail(songId: string): Promise<Song | null> {
+    const { bvid, page } = parseBilibiliId(songId);
     try {
       const res = await this.api.get("/x/web-interface/view", {
-        params: { bvid: songId },
+        params: { bvid },
         headers: this.cookieHeaders,
       });
 
       const data = res.data?.data;
       if (!data) return null;
 
-      // Cache cid for later audio URL fetching
-      if (data.pages?.[0]?.cid) {
-        this.cidCache.set(songId, data.pages[0].cid);
+      const pages = data.pages ?? [];
+      // 缓存所有分P的 cid 映射
+      for (const p of pages) {
+        this.cidCache.set(`${bvid}?p=${p.page}`, p.cid);
+      }
+      if (pages[0]?.cid) {
+        this.cidCache.set(bvid, pages[0].cid);
+      }
+
+      const targetPage = pages.find((p: any) => p.page === page) ?? pages[0];
+
+      // 若为多P视频，返回对应分P的名称与独立时长
+      if (pages.length > 1 && targetPage) {
+        const partTitle = targetPage.part && targetPage.part !== data.title
+          ? `${data.title} - P${targetPage.page} ${targetPage.part}`
+          : `${data.title} (P${targetPage.page})`;
+        return {
+          id: `${bvid}?p=${targetPage.page}`,
+          name: partTitle,
+          artist: data.owner?.name ?? "",
+          album: "",
+          duration: targetPage.duration ?? 0,
+          coverUrl: this.normalizeCover(data.pic ?? ""),
+          platform: "bilibili" as const,
+        };
       }
 
       return {
@@ -211,7 +266,7 @@ export class BiliBiliProvider implements MusicProvider {
         name: data.title ?? "",
         artist: data.owner?.name ?? "",
         album: "",
-        duration: data.duration ?? 0,
+        duration: targetPage?.duration ?? data.duration ?? 0,
         coverUrl: this.normalizeCover(data.pic ?? ""),
         platform: "bilibili" as const,
       };
@@ -220,9 +275,47 @@ export class BiliBiliProvider implements MusicProvider {
     }
   }
 
+  /** 获取视频所有分P列表 */
+  async getVideoParts(bvid: string): Promise<BiliVideoPartsResult | null> {
+    const { bvid: cleanBvid } = parseBilibiliId(bvid);
+    try {
+      const res = await this.api.get("/x/web-interface/view", {
+        params: { bvid: cleanBvid },
+        headers: this.cookieHeaders,
+      });
+
+      const data = res.data?.data;
+      if (!data) return null;
+
+      const pages = data.pages ?? [];
+      for (const p of pages) {
+        this.cidCache.set(`${cleanBvid}?p=${p.page}`, p.cid);
+      }
+      if (pages[0]?.cid) {
+        this.cidCache.set(cleanBvid, pages[0].cid);
+      }
+
+      return {
+        bvid: cleanBvid,
+        title: data.title ?? "",
+        coverUrl: this.normalizeCover(data.pic ?? ""),
+        artist: data.owner?.name ?? "",
+        parts: pages.map((p: any) => ({
+          part: p.page,
+          cid: p.cid,
+          title: p.part ?? `P${p.page}`,
+          duration: p.duration ?? 0,
+        })),
+      };
+    } catch {
+      return null;
+    }
+  }
+
   /** Get CID for a bvid, using cache when available */
-  private async getCid(bvid: string): Promise<number | null> {
-    const cached = this.cidCache.get(bvid);
+  private async getCid(bvid: string, page = 1): Promise<number | null> {
+    const key = page > 1 ? `${bvid}?p=${page}` : bvid;
+    const cached = this.cidCache.get(key) ?? (page === 1 ? this.cidCache.get(`${bvid}?p=1`) : undefined);
     if (cached) return cached;
 
     // Limit cache size to prevent unbounded growth
@@ -231,20 +324,22 @@ export class BiliBiliProvider implements MusicProvider {
       if (firstKey) this.cidCache.delete(firstKey);
     }
 
-    const detail = await this.getSongDetail(bvid);
+    const songId = page > 1 ? `${bvid}?p=${page}` : bvid;
+    const detail = await this.getSongDetail(songId);
     if (!detail) return null;
-    return this.cidCache.get(bvid) ?? null;
+    return this.cidCache.get(key) ?? this.cidCache.get(`${bvid}?p=${page}`) ?? this.cidCache.get(bvid) ?? null;
   }
 
   async getSongUrl(songId: string, _quality?: string): Promise<SongUrlResult | null> {
-    const cid = await this.getCid(songId);
+    const { bvid, page } = parseBilibiliId(songId);
+    const cid = await this.getCid(bvid, page);
     if (!cid) return null;
 
     try {
       const res = await this.api.get("/x/player/playurl", {
         params: {
           cid,
-          bvid: songId,
+          bvid,
           fnval: 16, // DASH format
         },
         headers: this.cookieHeaders,

src/web/api/music.test.ts

@@ -438,3 +438,68 @@ describe("music router POST /local/upload — content types and size cap (#149)"
     expect(uploadAudio).not.toHaveBeenCalled();
   });
 });
+
+describe("music router GET /bilibili/parts", () => {
+  it("returns 400 when bvid is missing", async () => {
+    const router = createMusicRouter(
+      fakeProvider("netease"),
+      fakeProvider("qq"),
+      fakeProvider("bilibili"),
+      pino({ level: "silent" })
+    );
+    const app = express();
+    app.use("/api/music", router);
+
+    const res = await request(app).get("/api/music/bilibili/parts");
+    expect(res.status).toBe(400);
+    expect(res.body.error).toBe("bvid is required");
+  });
+
+  it("returns parts from bilibili provider when available", async () => {
+    const mockBilibili = {
+      platform: "bilibili" as const,
+      search: vi.fn(),
+      getVideoParts: vi.fn().mockResolvedValue({
+        bvid: "BV1test",
+        title: "多P视频测试",
+        parts: [
+          { part: 1, cid: 101, title: "P1", duration: 100 },
+          { part: 2, cid: 102, title: "P2", duration: 200 },
+        ],
+      }),
+    };
+    const router = createMusicRouter(
+      fakeProvider("netease"),
+      fakeProvider("qq"),
+      mockBilibili as unknown as MusicProvider,
+      pino({ level: "silent" })
+    );
+    const app = express();
+    app.use("/api/music", router);
+
+    const res = await request(app).get("/api/music/bilibili/parts?bvid=BV1test");
+    expect(res.status).toBe(200);
+    expect(res.body.bvid).toBe("BV1test");
+    expect(res.body.parts).toHaveLength(2);
+    expect(mockBilibili.getVideoParts).toHaveBeenCalledWith("BV1test");
+  });
+
+  it("returns 404 when getVideoParts returns null", async () => {
+    const mockBilibili = {
+      platform: "bilibili" as const,
+      search: vi.fn(),
+      getVideoParts: vi.fn().mockResolvedValue(null),
+    };
+    const router = createMusicRouter(
+      fakeProvider("netease"),
+      fakeProvider("qq"),
+      mockBilibili as unknown as MusicProvider,
+      pino({ level: "silent" })
+    );
+    const app = express();
+    app.use("/api/music", router);
+
+    const res = await request(app).get("/api/music/bilibili/parts?bvid=BV1notfound");
+    expect(res.status).toBe(404);
+  });
+});

src/web/api/music.ts

@@ -382,6 +382,31 @@ export function createMusicRouter(
     }
   });
 
+  // B站分P列表查询
+  router.get("/bilibili/parts", async (req, res) => {
+    try {
+      const bvid = (req.query.bvid as string)?.trim();
+      if (!bvid) {
+        res.status(400).json({ error: "bvid is required" });
+        return;
+      }
+      const provider = bilibiliProvider as any;
+      if (typeof provider.getVideoParts === "function") {
+        const result = await provider.getVideoParts(bvid);
+        if (!result) {
+          res.status(404).json({ error: "Video not found" });
+          return;
+        }
+        res.json(result);
+      } else {
+        res.status(501).json({ error: "Not supported" });
+      }
+    } catch (err) {
+      logger.error({ err }, "Get bilibili parts failed");
+      res.status(500).json({ error: (err as Error).message });
+    }
+  });
+
   // Enabled sources + default platform, for the web UI (source tabs, default
   // search/playback source). Without a config (unit-test routers) everything
   // reports enabled with the legacy netease default.

web/src/App.vue

@@ -7,6 +7,7 @@
     <Player />
     <Toast />
     <Queue class="mobile-queue" :open="mobileQueueOpen" @close="mobileQueueOpen = false" />
+    <BilibiliPartModal />
 
     <!-- Mobile mini player -->
     <div v-if="currentSong" class="m-player" @click="onPlayerRowClick">
@@ -102,6 +103,7 @@ import Player from './components/Player.vue';
 import CoverArt from './components/CoverArt.vue';
 import Toast from './components/Toast.vue';
 import Queue from './components/Queue.vue';
+import BilibiliPartModal from './components/BilibiliPartModal.vue';
 
 const playerStore = usePlayerStore();
 const session = useSession();

web/src/components/BilibiliPartModal.vue

@@ -0,0 +1,293 @@
+<template>
+  <div v-if="modal.open" class="edit-modal-overlay" @click.self="store.closeBilibiliPartModal">
+    <div class="edit-modal">
+      <h3 class="modal-title">选择分P</h3>
+
+      <div class="form-group">
+        <label>视频名称</label>
+        <div class="video-info-box">
+          <CoverArt :url="modal.coverUrl" :size="44" :radius="8" />
+          <div class="video-meta">
+            <div class="video-title" :title="modal.title">{{ modal.title }}</div>
+            <div class="video-hint">共 {{ modal.parts.length }} 个分P · {{ actionHint }}</div>
+          </div>
+        </div>
+      </div>
+
+      <div class="form-group">
+        <label>分P列表</label>
+        <div class="parts-list">
+          <div
+            v-for="part in modal.parts"
+            :key="part.part"
+            class="part-item"
+            :class="{ active: selectedPart?.part === part.part }"
+            @click="selectedPart = part"
+            @dblclick="confirmSelect(part)"
+          >
+            <span class="part-badge">P{{ part.part }}</span>
+            <span class="part-name" :title="part.title">{{ part.title }}</span>
+            <span class="part-duration">{{ formatDuration(part.duration) }}</span>
+          </div>
+        </div>
+      </div>
+
+      <div class="modal-actions">
+        <button class="btn-secondary" @click="store.closeBilibiliPartModal">取消</button>
+        <button
+          class="btn-primary"
+          :disabled="!selectedPart"
+          @click="selectedPart && confirmSelect(selectedPart)"
+        >
+          {{ confirmBtnText }}
+        </button>
+      </div>
+    </div>
+  </div>
+</template>
+
+<script setup lang="ts">
+import { ref, computed, watch } from 'vue';
+import { usePlayerStore, type BiliPart } from '../stores/player.js';
+import CoverArt from './CoverArt.vue';
+
+const store = usePlayerStore();
+const modal = computed(() => store.biliPartModal);
+
+const selectedPart = ref<BiliPart | null>(null);
+
+// 弹窗打开时默认选中第 1 P
+watch(
+  () => modal.value.open,
+  (open) => {
+    if (open && modal.value.parts.length > 0) {
+      selectedPart.value = modal.value.parts[0];
+    } else {
+      selectedPart.value = null;
+    }
+  },
+  { immediate: true },
+);
+
+const actionHint = computed(() => {
+  if (modal.value.action === 'playNext') return '添加到下一首播放';
+  if (modal.value.action === 'add') return '添加到播放队列';
+  return '立即播放';
+});
+
+const confirmBtnText = computed(() => {
+  if (modal.value.action === 'playNext') return '下一首播放';
+  if (modal.value.action === 'add') return '添加到队列';
+  return '播放';
+});
+
+function confirmSelect(part: BiliPart) {
+  store.selectBilibiliPart(part);
+}
+
+function formatDuration(seconds: number): string {
+  if (!seconds || seconds <= 0) return '--:--';
+  const m = Math.floor(seconds / 60);
+  const s = seconds % 60;
+  return `${m}:${s.toString().padStart(2, '0')}`;
+}
+</script>
+
+<style lang="scss" scoped>
+.edit-modal-overlay {
+  position: fixed;
+  inset: 0;
+  background: rgba(0, 0, 0, 0.5);
+  z-index: 200;
+  display: flex;
+  align-items: center;
+  justify-content: center;
+}
+
+.edit-modal {
+  background: var(--bg-secondary);
+  border-radius: var(--radius-lg);
+  padding: 28px;
+  width: 480px;
+  max-width: 90vw;
+  max-height: 80vh;
+  display: flex;
+  flex-direction: column;
+}
+
+.modal-title {
+  font-size: 20px;
+  font-weight: 700;
+  margin-bottom: 20px;
+  color: var(--text-primary);
+}
+
+.form-group {
+  margin-bottom: 16px;
+  display: flex;
+  flex-direction: column;
+  min-height: 0;
+
+  label {
+    display: block;
+    font-size: 13px;
+    font-weight: 600;
+    margin-bottom: 6px;
+    opacity: 0.7;
+    color: var(--text-primary);
+  }
+}
+
+.video-info-box {
+  display: flex;
+  align-items: center;
+  gap: 12px;
+  padding: 10px 14px;
+  background: var(--hover-bg);
+  border: 1px solid var(--border-color);
+  border-radius: var(--radius-sm);
+
+  .video-meta {
+    flex: 1;
+    min-width: 0;
+  }
+
+  .video-title {
+    font-size: 13px;
+    font-weight: 600;
+    color: var(--text-primary);
+    white-space: nowrap;
+    overflow: hidden;
+    text-overflow: ellipsis;
+    margin-bottom: 2px;
+  }
+
+  .video-hint {
+    font-size: 12px;
+    color: var(--text-secondary);
+  }
+}
+
+.parts-list {
+  display: flex;
+  flex-direction: column;
+  gap: 6px;
+  max-height: 280px;
+  overflow-y: auto;
+  padding-right: 4px;
+
+  &::-webkit-scrollbar {
+    width: 6px;
+  }
+  &::-webkit-scrollbar-thumb {
+    background: var(--border-color);
+    border-radius: var(--radius-sm);
+  }
+}
+
+.part-item {
+  display: flex;
+  align-items: center;
+  gap: 10px;
+  padding: 10px 14px;
+  background: var(--hover-bg);
+  border: 1px solid var(--border-color);
+  border-radius: var(--radius-sm);
+  cursor: pointer;
+  transition: all var(--transition-fast);
+
+  &:hover {
+    border-color: var(--color-primary);
+    background: var(--color-primary-10, rgba(0, 161, 214, 0.08));
+  }
+
+  &.active {
+    border-color: var(--color-primary);
+    background: var(--color-primary-15, rgba(0, 161, 214, 0.15));
+
+    .part-badge {
+      background: var(--color-primary);
+      color: white;
+    }
+
+    .part-name {
+      color: var(--color-primary);
+      font-weight: 600;
+    }
+  }
+
+  .part-badge {
+    font-size: 11px;
+    font-weight: 700;
+    padding: 2px 6px;
+    border-radius: var(--radius-xs);
+    background: var(--color-primary-10, rgba(0, 161, 214, 0.1));
+    color: var(--color-primary);
+    flex-shrink: 0;
+    transition: all var(--transition-fast);
+  }
+
+  .part-name {
+    flex: 1;
+    font-size: 13px;
+    color: var(--text-primary);
+    white-space: nowrap;
+    overflow: hidden;
+    text-overflow: ellipsis;
+  }
+
+  .part-duration {
+    font-size: 12px;
+    color: var(--text-secondary);
+    font-variant-numeric: tabular-nums;
+    flex-shrink: 0;
+  }
+}
+
+.modal-actions {
+  display: flex;
+  gap: 10px;
+  justify-content: flex-end;
+  margin-top: 10px;
+}
+
+.btn-primary {
+  padding: 10px 20px;
+  background: var(--color-primary);
+  color: white;
+  border-radius: var(--radius-sm);
+  font-size: 13px;
+  font-weight: 600;
+  white-space: nowrap;
+  border: none;
+  cursor: pointer;
+  transition: transform var(--transition-fast);
+
+  &:hover:not(:disabled) {
+    transform: scale(1.02);
+  }
+  &:active:not(:disabled) {
+    transform: scale(0.98);
+  }
+  &:disabled {
+    opacity: 0.5;
+    cursor: not-allowed;
+  }
+}
+
+.btn-secondary {
+  padding: 10px 20px;
+  background: var(--hover-bg);
+  border-radius: var(--radius-sm);
+  font-size: 13px;
+  font-weight: 600;
+  color: var(--text-primary);
+  border: none;
+  cursor: pointer;
+  transition: opacity var(--transition-fast);
+
+  &:hover {
+    opacity: 0.8;
+  }
+}
+</style>

web/src/stores/player.ts

@@ -17,6 +17,24 @@ export interface Song {
 
 export type Source = 'jellyfin' | 'netease' | 'qq' | 'kugou' | 'spotify';
 
+export interface BiliPart {
+  part: number;
+  cid: number;
+  title: string;
+  duration: number;
+}
+
+export interface BiliPartModalState {
+  open: boolean;
+  song: Song | null;
+  action: 'play' | 'playNext' | 'add';
+  bvid: string;
+  title: string;
+  coverUrl: string;
+  artist: string;
+  parts: BiliPart[];
+}
+
 export interface AlbumItem {
   id: string;
   name: string;
@@ -138,6 +156,18 @@ export const usePlayerStore = defineStore('player', {
     // Transient notification for surfacing failures (e.g., "song not playable")
     // to a global Toast. Bumped `id` triggers re-render of the same message.
     notification: null as { id: number; message: string; type: 'error' | 'info' } | null,
+
+    // Bilibili 多P分P选择弹窗状态
+    biliPartModal: {
+      open: false,
+      song: null,
+      action: 'play',
+      bvid: '',
+      title: '',
+      coverUrl: '',
+      artist: '',
+      parts: [] as BiliPart[],
+    } as BiliPartModalState,
   }),
 
   getters: {
@@ -411,8 +441,74 @@ export const usePlayerStore = defineStore('player', {
       this.notification = { id: Date.now(), message, type };
     },
 
-    async playSong(song: Song) {
+    /**
+     * 检查 B站视频是否为多P，若为多P则弹窗询问，单P则直接修正时长并继续
+     */
+    async checkBilibiliMultiPart(song: Song, action: 'play' | 'playNext' | 'add'): Promise<boolean> {
+      try {
+        const cleanBvid = song.id.split('?')[0].split(':')[0];
+        const res = await axios.get('/api/music/bilibili/parts', { params: { bvid: cleanBvid } });
+        const parts: BiliPart[] = res.data?.parts ?? [];
+        if (parts.length > 1) {
+          this.biliPartModal = {
+            open: true,
+            song,
+            action,
+            bvid: cleanBvid,
+            title: res.data.title || song.name,
+            coverUrl: res.data.coverUrl || song.coverUrl,
+            artist: res.data.artist || song.artist,
+            parts,
+          };
+          return true; // 弹窗接管
+        }
+        if (parts.length === 1) {
+          song.duration = parts[0].duration;
+        }
+      } catch {
+        // 网络请求异常则降级为正常播放
+      }
+      return false;
+    },
+
+    selectBilibiliPart(part: BiliPart) {
+      if (!this.biliPartModal.open || !this.biliPartModal.song) return;
+      const { song, action, bvid, title, artist, coverUrl } = this.biliPartModal;
+      this.biliPartModal.open = false;
+
+      const partTitle = part.title && part.title !== title
+        ? `${title} - P${part.part} ${part.title}`
+        : `${title} (P${part.part})`;
+
+      const partSong: Song = {
+        ...song,
+        id: `${bvid}?p=${part.part}`,
+        name: partTitle,
+        artist: artist || song.artist,
+        coverUrl: coverUrl || song.coverUrl,
+        duration: part.duration,
+      };
+
+      if (action === 'play') {
+        this.playSong(partSong, true);
+      } else if (action === 'playNext') {
+        this.playNextSong(partSong, true);
+      } else if (action === 'add') {
+        this.addSong(partSong, true);
+      }
+    },
+
+    closeBilibiliPartModal() {
+      this.biliPartModal.open = false;
+      this.biliPartModal.song = null;
+    },
+
+    async playSong(song: Song, skipPartCheck = false) {
       if (!this.activeBotId) return;
+      if (!skipPartCheck && song.platform === 'bilibili' && !song.id.includes('?p=')) {
+        const handled = await this.checkBilibiliMultiPart(song, 'play');
+        if (handled) return;
+      }
       // Guests use the non-destructive "play now" (insert-next + skip) so they
       // can't wipe everyone else's queue; members/admins keep the normal behavior.
       const endpoint = useSession().isGuest.value ? 'play-now-song' : 'play-song';
@@ -424,8 +520,12 @@ export const usePlayerStore = defineStore('player', {
       this._syncAfterAction();
     },
 
-    async playNextSong(song: Song) {
+    async playNextSong(song: Song, skipPartCheck = false) {
       if (!this.activeBotId) return;
+      if (!skipPartCheck && song.platform === 'bilibili' && !song.id.includes('?p=')) {
+        const handled = await this.checkBilibiliMultiPart(song, 'playNext');
+        if (handled) return;
+      }
       const res = await axios.post(`/api/player/${this.activeBotId}/play-next-song`, { song });
       if (res.data?.message) {
         this.notify(res.data.message, res.data.ok === false ? 'error' : 'info');
@@ -444,8 +544,12 @@ export const usePlayerStore = defineStore('player', {
       await axios.post(`/api/player/${this.activeBotId}/add-by-id`, { songId, platform });
     },
 
-    async addSong(song: Song) {
+    async addSong(song: Song, skipPartCheck = false) {
       if (!this.activeBotId) return;
+      if (!skipPartCheck && song.platform === 'bilibili' && !song.id.includes('?p=')) {
+        const handled = await this.checkBilibiliMultiPart(song, 'add');
+        if (handled) return;
+      }
       await axios.post(`/api/player/${this.activeBotId}/add-song`, { song });
     },